Engineered in Australia and manufactured in the United States using the same patented lens/reflector technology as ARB’s existing Intensity LED driving lights, the ARB Intensity V2 LED light bar utilizes Hyperspot™ optics and advanced flood optics to intensify the light output of the 40 OSRAM LEDs (2 rows of 20) encased in a virtually indestructible polycarbonate lens and powder coated, extruded aluminum body with high-pressure die-cast end caps.
ARB Intensity V1 light bar in the spot/combo will be discontinued and no longer ranged. (AR40S & AR40C)
Note: Intensity AR40 V1 LED Light Bar featured in video.
The ARB Intensity V2 LED Light bar is a substantial upgrade from its predecessor, the Iconic Australian light bar. It produces clean crisp light with refined color temp on the led that helps reduce eye strain and fatigue for long-distance driving and reaches amazing distances down the road to improve safety. It is an excellent choice to provide good lighting for distance as well as width.
The Intensity V2 LED light bar uses the same optimal chassis design of the previous Intensity light, yet incorporates the latest in LED technology using OSRAM GIANTS and advanced optics via the latest Hyperspot™ technology in our combo configuration, a further refined design for our flood configurations to extend the floods ability to drive light further down the road, as well as spreading the light in front of the vehicle. This can only be achieved by dedicated flood and spot optics combined into one light bar.
Hyperspot™ is a refined optic used to focus and intensify the light output and drive the LED OSRAM GIANTS at amazing distances down the road while keeping clarity in the beam and controlling the beam pattern to the correct area on the road without spilling light into areas not required or fore filled by the flood configuration. This configuration delivers 305W out of the new AR40CV2 and produces over 25,000 Lumens.
To provide an intense amount of light in all driving conditions, the AR40 Intensity V2 Light Bar utilizes OSRAM Giant LEDs to produce up to 25,080 lumens of raw light output (AR40CV2). For a single AR40CV2 combo, this means a light throw of 1 Lux @ 926m (3038ft) and 131ft of spread across the front of the vehicle. Plus, the warmer color temperature assists driver comfort and reduces eye fatigue.
A refined optic used to focus and intensify the light output as well as drive the OSRAM LEDs a great distance down the road, the Hyperspot™ technology also maintains clarity in the beam and controls the beam pattern to the correct area without spilling into unnecessary areas.
|Features - AR40CV2||Specifications - AR40CV2|
|Powder-coated aluminum extrusion body with pressure die-cast end caps||High output OSRAM® square LED’s|
|Virtually indestructible polycarbonate lens||25,080 Raw Lumens for the AR40CV2 Combo|
|Hard-coated, durable polycarbonate protective cover||9-36 Volts operating (Lights and Loom compatible with 24V and 12V vehicles)|
|40 OSRAM™ LEDs with 50,000+ hour lifespan||305 watts of power|
|24 Hyperspot® and 16 high-output flood optic LEDS||21A @ 14.4V (Requires new looms, see below)|
|Gore® breather||1 Lux @ 3038ft|
|Vibration tested to MIL810-STDG||6 degree Spread for Spot and 20 degree spread for Flood|
|RoHS compliant||Input Cable Length – 400mm (15.74”)|
|Dust and waterproof to IP68 rating||Operating Temp -40°C to 63°C (-40°F to +145°F)|
|Submersible to three metres / 9.8 feet||Tested to Exceed 90°C / 194°F|
|Over and under voltage protection||5700K Color Temp|
|Integrated active thermal management||Weight – 4.05Kg (8.9lb)|
|Protected against radio frequency (RFI) and electromagnetic (EMC) interference||Dimensions – 560mm (22.1″) x 91mm (3.6″) x 125mm (4.9″)|
|Deutsch DTP waterproof connector rated to IP68 specifications||Three-year Warranty|
|–||Fitting Time starting from – 1.75hrs (Standard setup)|
For an integrated fit to your vehicle, mounting kits are designed specifically for ARB bumpers and are available in three sizes to cater for different tube diameters. Each kit is manufactured from extruded aluminum and incorporates stainless steel fasteners.
For increased versatility, an alternative to the bull bar mount is the pedestal mounting kit, enabling fitment to the pan of an ARB Bumper or a roof rack. All fasteners are manufactured from stainless steel, with mounting hardware manufactured from a combination of aluminum and steel.
Manufactured from polycarbonate and hard coated for scratch and UV resistance, these covers will protect your Intensity light bar from the elements. Available in clear, amber and solid black.
Check out our latest 4x4 Culture magazine issue online
The latest tech tips, vehicle builds, and destinations.
Stories that document our collective journey.
Enter your email address to receive updates about our products and events as well as newsletters.