fbpx

ARB SUMMIT BUMPER

The ARB Summit Bumper is designed as a full bumper replacement with 4WD use in mind. Compatible with winches up to 10,000lb, it provides needed off-road protection, twin jack points, and rated recovery points, while accommodating adaptive cruise control and parking sensors. The width of the Summit Bumper blends seamlessly into the vehicle design, complementing either wide or narrow fender flares.

ARB Summit Winch Bumper; Includes Twin Jack Points, Rated Recovery Points; Accommodates Adaptive Cruise Control And Parking Sensors.

Winch Compatibility:  WARN ZEON 8, 8-S, 10, 10-S, WARN ZEON Platinum 10, 10-S, WARN VR Evo 8, 8-S, 10, 10-S, Smittybilt X20 Gen2 10K

PROTECTION AND STYLING CHARACTERISTICS

  • Vehicle specific design for the 2021 Ford Bronco
  • Compatible with winches up to 10,000 lb
  • Twin jack points located in lower pan to suit ARB Jack and mechanical jacks
  • Twin forged bar-mounted ARB Rated 8T recovery points
  • Wing design allows for a 37” tire to be fitted (suitable suspension lift and rim off set required)
  • Finished in Integrit™ black textured powder coat
  • EDP20 Ecoat under powder coat used for additional corrosion resistance
  • Suits ARB UVP (PN 5480100) and OE Ford under panel
  • Approximate weight of the bumper, chassis mounts and fitting kit is 172lb
  • Suits the use of OE LED fog lights (Broncos without fog lights use ARB LED Fog Lights Part Number: 3580010)

Summit Winch Bumper Add

Part No
3480010
MSRP (USD)
$1695.00

FEATURES

3421570K_4Runner_SummitBar_FeatureImage

CB Antenna Brackets

The Summit Bumper incorporates two CB antenna brackets welded behind the top cross tube. Custom fit, clamp on brackets are also available for additional antenna mounting.

CB Antenna Brackets

The Summit Bumper incorporates two CB antenna brackets welded behind the top cross tube. Custom fit, clamp on brackets are also available for additional antenna mounting.

Larger Tubing

60.3mm mandrel steel tubing provides increased frontal protection, as well offering greater visual styling to modern four-wheel-drive vehicles.

Wing Design

60.3mm mandrel steel tubing provides increased frontal protection, as well offering greater visual styling to modern four-wheel-drive vehicles.

Wider Edge Radius

A 30mm wing and center section edge radius offers increased strength while complementing modern vehicle design.

Driving Light Provision

Exceptionally durable and secure, all ARB Bumpers serve as an ideal platform to mount driving lights, helping ensure maximum performance and longevity. Driving lights mounted to a high-quality bumper prevents problems such as excessive movement, a vibrating beam pattern, premature bulb failure and eventual fatiguing of the light bodies.

Press Formed Top-Pan and Cover Panel

Press forming has been utilized to create a stronger center pan that features smooth, continuous edges. A press-formed aluminum winch cover panel finishes off the bumper for when a winch is not installed.

Jacking Points

Eliminating the need for a mounting bracket, jacking points are integrated into the design of Summit Bumpers.

Winch Compatibility

Mounting a winch to a vehicle requires a properly supported structure that is designed to accommodate the stresses of winching. When using a snatch block to increase winching capacity, the forces are multiplied to several times the rated capacity of the winch. The ARB Summit Bumper features the option of fitting a winch, and is designed and tested to endure and exceed such loads.

Split-Pan Design

The wide, split-pan design enhances the strength of the bumper, while providing the radiator and engine with a massive amount of air flow. An integrated winch clutch opening makes winch operation simple.

Air Bag Compatible

With an air bag equipped vehicle, it is essential that the vehicle's crush rate and air bag triggering are not altered when a bumper is installed. ARB assesses each vehicle's frontal crush characteristics and replicates the crush rate into the design of each air bag compatible bumper and its steel mounting system. This achieves maximum possible vehicle and passenger protection without affecting the crash pulse.

Fog Lights

Perfect for driving in inclement weather, these fog lights provide a broad spread of light to illuminate the road ahead.

LED Indicators and Clearance Lights

12 high intensity yellow LEDs and 4 white LEDs provide increased light output in all conditions.

Steel Uprights

Each bumper upright is cut from a single sheet of steel and extends from the top tube through to the bumper section and actually forms part of the bumper to chassis mount. This process ensures the whole outer frame receives the maximum possible support. Wide, press formed cover straps are then welded onto each upright to ensure there are no exposed sharp edges.

top