REAR BUMPERS

Designed to offer simple and lightweight protection, this JK rear bumper can be optioned with a wheel carrier assembly (shown) to allow fitment of spare rim and Tire. The ‘catchless’ design wheel carrier opens automatically when the vehicle tailgate is opened and has adjustment for up to 1 inch body lift kits. Available for all 4×4 models and manufactured from steel, with a vehicle specific mounting system, ARB’s rear bumper will provide protection for the rear of your JK. An optional wiring loom for trailer lighting is also available. Please refer to the application guide for part numbers and fitting notes.

APPLICATION GUIDE/FITTING NOTES

Protection & Styling Characteristics

  • Durable steel construction for maximum protection
  • Vehicle specific design to complement the JK and maximise functionality
  • Departure angles optimised for off road terrain
  • Dual Hi-Lift jacking points
  • Features twin integrated tow points
  • Finished in a zinc primed, hard-wearing satin black or textured powder coat with the added option of colour coding to individual vehicles
  • OE brake light retained
  • Incorporates a single swing out wheel carrier
  • Carrier mounted via dual shear pivots for maximum strength
  • Provision to mount ARB mud flaps
  • Will accommodate up to a 40″ tyre
  • Sliding rear wheel mount to enable fitment of various tyre sizes
  • Provision to mount optional accessories including Hi-Lift jack mounting kit

Rear Bar With Tow Points Add

Jeep Wrangler 2011-2011
Part No
5650200
MSRP (USD)
$618.00

Rear Bar Textured Black Add

Jeep Wrangler 2011-2011
Part No
5650360
MSRP (USD)
$735.00

Wheel Carrier Suit 5650360/370 Add

Jeep Wrangler 2011-2011
Part No
5750320
MSRP (USD)
$951.00

Features

3623040_studio_7-Edit

DIFFUSER PANELS

Press formed from 1.6mm steel and powder coated for corrosion resistance, the rear diffuser panels aid in protecting the underside of your four-wheel drive when you are off-roading.

DIFFUSER PANELS

Press formed from 1.6mm steel and powder coated for corrosion resistance, the rear diffuser panels aid in protecting the underside of your four-wheel drive when you are off-roading.

PRESS FORMED WINGS

Press formed steel panels that utilise three mounting points to the chassis for optimum strength and rigidity. Wing panels come standard in a black powder coat finish.

TREAD PANEL

A silver anodized extruded aluminium section with ridges for grip. Additionally, there is an integrated license plate light is included if the factory light cannot be used.

HEAVY-DUTY HITCH RECEIVER

Central to the practicality of the Summit Rear Bumper is the integrated heavy-duty towing system, featuring a 3.5t class 4 2 inch hitch receiver a standard fitment.

STEEL FRAME

The bumper is built around a 60.3mm x 2.6mm tubular steel subframe, with multiple chassis mounting points, designed to provide maximum clearance, minimizing the chance of contact with the ground over difficult terrain.

PARKING SENSOR COMPATIBLE

Available for vehicles with and without factory rear parking sensors and can be color coded for additional aesthetic appeal.

JACK POINTS

Located on the lower edges of the bar are two jack points, suitable for use with either the ARB Jack or a Hi-Lift jack.

CONNECTIONS

Tucked away safely behind a hinged steel access panel is the provision for securely mounting trailer plug wiring, as well as, an optional ARB Air Compressor outlet and a 50 amp Anderson plug.

top