fbpx

ARB BONDI STUBBY BUMPER

With the release of the new Jeep Wrangler JL, the engineers at ARB were excited to have the opportunity to design a whole new bumper to suit. The new Bondi Stubby bumper utilizes a single-piece press formed centre pan, pulse welded uprights and upswept outer wings providing the best protection possible while still allowing maximum clearance for aftermarket wheels and tires.

Significant protection and aesthetic appeal have been at the forefront of the design of this bumper, with an integrated bash plate along the base and a low slung forward-facing 3-inch tube hoop perched along the top to protect the most vulnerable vehicle components.

PROTECTION AND STYLING CHARACTERISTICS

  • Vehicle specific design to complement the Wrangler JL
  • Durable steel construction for maximum protection
  • Single-piece press formed centre pan
  • Bash plate under panel included for added protection, finished in vintage silver
  • Twin high lift jack points in the bar perfect for use with ARB Jack or a Hi-Lift jack
  • Two aerial or driving light brackets located on the top of the centre tube
  • Will accommodate Warn, Bushranger and Smittybilt low mount model electric winches up to 10,000lbs
  • Provision to accommodate ARB Intensity LED’s and a range of Bushranger and IPF lights
  • Two integrated chassis-mounted rated recovery points, powder-coated red for maximum visibility
  • Bumper adds approximately 34mm to the overall length of the vehicle
  • Approximate weight of the bar, chassis mounts and fitting kit is 50kg
  • Approximately 19kg is removed from the vehicle for fitment of the bar
  • Zinc rich primer for additional corrosion resistance, followed by a textured Integrit black powder coat finish
  • Chassis mounts manufactured with 5mm sheet steel
  • Separate winch cradle manufactured from combination of 4mm and 5mm sheet steel
  • 76.1mm main tube
  • Pan manufactured from 3mm sheet steel including press forms and multi folds for added structural integrity
  • Uprights manufactured from laser-cut 4mm sheet steel

Bondi Stubby Bumper Add

Part No
3450470
MSRP (USD)
$854.00
20190417_LHM_Backwards_Bill_0084
ARB Jl Bondi Stubby_1096x480_1
ARB Jl Bondi Stubby_1096x480_2

Features

JL-Stubby-bondi_878x640

Recovery Points

Integrated recovery points that are certified to carry over 8 tonnes. This accessory is expertly engineered and finished in ARB's signature red.

Recovery Points

Integrated recovery points that are certified to carry over 8 tonnes. This accessory is expertly engineered and finished in ARB's signature red.

Trail Light Panels

Removable trail light panels to allow flexibility with your JL. **Mounts not included with this bar

Recessed Fair Lead Mount

Increased depth recessed fair lead mount to add style and strength to this bar.

Bash Plate

ARB have included a pressed steel bash plate to reduce any visible marking to the bar itself.

Jacking Points

Eliminating the need for a mounting bracket, these high-lift jacking points are integrated into the design of Summit Bumpers.

Winch Cradle

For all the recovery activities this vehicle will undertake, there is a 12,000lb winch cradle integrated.

Center Pan

The center pan has been pressed, and has been fabricated as a single piece.

Mounting Holes

Mounting holes included for ARB's LED lightbar to provide security for this product when mounted on this bar.

Practical Design

An expertly engineered design for the Jeep JL Wrangler with a 3" center frame, including light mounts.

CHECK OUT OUR PACKAGE OPTIONS

top