Skip to main content
Edit PageControl Panel

Flat Rate Shipping on Roof Racks - $99

For a limited time, get any roof rack delivered for a flat rate of just $99. Expand your overlanding capabilities with ARB's sleek range of 4x4 roof racks.

Some exclusions may apply. Valid for orders within the contiguous U.S. only.

Flat Rate Shipping on Bumpers - $99

Get your ARB bumpers delivered straight to your door for a flat rate of just $99. Whether you're upgrading your off-road setup or replacing an old favorite, we've made shipping straightforward and affordable.

Some exclusions may apply. Valid for orders within the contiguous U.S. only.

Shop Your Vehicle

My Garage
    Submit
    Reset

    5th December, 2020

    How to Care for Your Protection Gear

    2015_Toyota_4Runner_Matthew_Scott_Arizona_3480x1820

    ARB PROTECTION – CARE GUIDE

    Bumpers, side rails, differential covers, and skid plates do more than just provide an aggressive look to your 4WD. They also enhance the durability of your rig by protecting crucial components against animal strikes and trail terrain. Protection equipment should be viewed as an investment; choosing parts from a reputable off-road company is important. ARB’s full line of Protection Equipment will defend components such as your radiator, rocker panels, oil pan, transmission, and many others. It is very important to protect your investment to ensure its performance is up to par. Following these steps will prolong the longevity of your protection equipment.

    ARB Protection Equipment with the satin finish, should be treated with a Carnauba based polish prior to exposure to the elements. It is also recommended that this is performed every six months or following exposure to salt, mud, sand, or other contaminants. The Carnauba polish will keep your protection equipment from fading and discoloring while also protecting it from the elements.

    SATIN FINISH CARE

    1. Clean your protection item with a mild car detergent. Make sure to remove all bug and tar build up. Wipe dry with a clean cloth or air dry with an air compressor.
    2. Using a Carnauba based polish and an applicator pad, apply to all exposed steel surfaces in a swirl motion. Repeat this until the entire surface is hazy.
    3. Using a clean, microfiber cloth, buff in a swirl motion until clean.

    Just like suspension, protection components are always being put to the test. It is important to ensure that the hardware securing them is always torqued. Add re-torquing your protection equipment to your pre-trip preparation and annual maintenance. This service can also be performed by an authorized ARB retailer.

    When off-road, you’re bound to add additional trail rash to your 4WD. It’s just a part of the sport, but each scar tells a story. After each trip and on a six month basis, fill these scratches and chips with touch up paint to prevent rust.

    Following these steps will protect your investment from the harsh elements that are found on and off-road. It will prolong the life of the product by preventing future rust and corrosion.

    Bumper-Pic-1
    FINISH CARE STEP 1
    bumper-Pic-2
    FINISH CARE STEP 2
    Bumper-Pic-3
    FINISH CARE STEP 3
    ARBClassicFridgeFreezerSIIPlusLowDrawers0319_109-1920x1080

    Up Next:

    Fridge Buying Guide

    Connect the ARB Fridge Freezer to your vehicle and enjoy ice cold food and drinks without running out of ice or your vehicle’s battery dying...