fbpx

ARB ROOF RACKS & ROOF BARS

Designed for the second and third generation Toyota Tacoma Double Cab models, the roof rack mounting kit accepts the Deluxe Roof Rack (part # 3800250) and Trade Rack (part #3800253), both measure 52×44 inches. The roof rack kit is finished in the same Millennium Grey powder coat that all ARB roof racks receive.

The roof rack mount kit has been designed to have six individual mount feet permanently mounted on the vehicle roof, using the factory OE roof rack attachment points. Longitudinal mount rails are attached with the ARB rack. This allows easy removal of the rack when not required. These racks are a great place to store bulky items like chairs, sleeping bags and tents and accepts the ARB Intensity LED Light Bar. The kit is precision made for a perfect and quick installation. The panels are zinc-plated and powder coated, while stainless steal fittings are used, to ensure weather resistance.

NOTE: The rack and mount kit add approximately 60 lbs to the roof of the vehicle and 7 inches to the height of the vehicle. For roof load carry capacity, please refer to manufacturers specification.

application guide/fitting notes
20170419_ARB_2016_Toyota_Tacoma_251

Fit Kit Roof Rack Suits 3800250/253 Add

Toyota Tacoma 2016-2020
Part No
3723010
MSRP (USD)
$179.00

ARB Steel Roof Rack Basket Add

52' x 44"
Part No
3800250
MSRP (USD)
$549.00

ARB Roof Rack Flat Add

53 x 49
Part No
3800180
MSRP (USD)
$401.00

ARB TRADE ROOF RACK KIT 52" X 44" Add

Part No
3800253K
MSRP (USD)
$700.00

Features

roofrack

Secure Storage

Top rail sits well above rack floor to ensure a secure load and is constructed from tough 25mm tube while the bottom rail utilizes 35mm tubing.

Secure Storage

Top rail sits well above rack floor to ensure a secure load and is constructed from tough 25mm tube while the bottom rail utilizes 35mm tubing.

Drainage Channel

Precision cut drainage channel, specifically designed to reduce build up of dirt and accumulation of moisture.

Fitting Kit

Variable height fitting kits include stainless steel hardware and allow even greater flexibility for multi-vehicle applications.

Steel Support Channel

Full length, zinc annealed steel support channel with plastic protection strip to distribute load along the gutter and prevent vehicle damage.

Steel Specific

MIG welding is used on the joins to ensure the optimum strength of each rack.

top